Remington 107714-02 Chainsaw Manual

The Remington 107714-02 Chainsaw is a powerful tool designed for cutting wood, trimming branches, and performing various landscaping tasks. Equipped with a robust motor and a sharp chain, this chainsaw is ideal for both professional and home use. Below are key sections for safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Operation Instructions 4. Specifications 5. Maintenance 6. Troubleshooting

Features at a Glance

Key components: 16-inch bar and chain, automatic oiling system, safety switch, and ergonomic handle for comfort.

Feature	Description
16-inch bar	Provides a good cutting length for various tasks
Automatic oiling system	Keeps the chain lubricated for optimal performance
Safety switch	Prevents accidental start-up
Ergonomic handle	Designed for comfort and reduced fatigue

Safety Information

Always wear protective gear including gloves, goggles, and ear protection. Ensure the area is clear of obstacles before operating the chainsaw.

Read the manual before use.
Keep hands and feet away from the cutting area.
Do not operate in wet conditions.
Ensure the chainsaw is properly maintained.

WARNING! Failure to follow safety instructions may result in serious injury.

Operation Instructions

To operate the chainsaw, follow these steps:

Check the oil level and fill if necessary.
Ensure the chain is properly tensioned.
Start the chainsaw using the safety switch.
Make clean and controlled cuts.

CAUTION! Always maintain a firm grip and proper stance while operating.

Specifications

Bar Length: 16 inches.
Power Source: Electric.
Weight: 10 lbs.
Chain Speed: 15 m/s.
Oiling System: Automatic.
Safety Features: Chain brake, safety switch.

Maintenance

Regular maintenance is essential for optimal performance. Follow these guidelines:

Clean the air filter regularly.
Sharpen the chain as needed.
Check and replace the oil as necessary.
Inspect the power cord for damage.

CAUTION! Always disconnect from power before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Chainsaw won't start	Power supply issue	Check power connection and switch
Chain is not cutting	Chain dull or improperly tensioned	Sharpen or adjust the chain
Excessive oil leakage	Clogged oil port	Clean the oil port
Vibration during use	Loose chain or bar	Tighten the chain and check bar

Reset: Disconnect power and reconnect to reset the chainsaw.