Remington RM4620 Chainsaw Manual

The Remington RM4620 is a powerful chainsaw designed for cutting firewood, trimming trees, and other outdoor tasks. It features a 46cc engine, a 20-inch bar, and a lightweight design for easy handling. Below are key sections for safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Operation Instructions 4. Specifications 5. Maintenance 6. Troubleshooting

Features at a Glance

Key components: 46cc engine, 20-inch bar, automatic oiling system, tool-less chain tensioning, and ergonomic handle design.

Feature	Description
46cc Engine	Powerful engine for efficient cutting
20-inch Bar	Long cutting length for larger logs
Automatic Oiling	Keeps the chain lubricated for smooth operation
Tool-less Chain Tensioning	Easy adjustment of chain tension without tools
Ergonomic Handle	Designed for comfort and reduced fatigue

Safety Information

Always wear appropriate safety gear including gloves, goggles, and hearing protection. Ensure the area is clear of obstacles before operating the chainsaw.

Read the manual thoroughly before use.
Keep hands and feet away from the cutting area.
Do not operate in wet conditions.
Ensure proper footing and balance.

WARNING! Failure to follow safety instructions may result in serious injury.

Operation Instructions

To start the chainsaw, follow these steps:

Ensure the chain brake is engaged.
Prime the fuel bulb.
Set the choke to the closed position.
Pull the starter cord until the engine fires.
Adjust the choke to the open position and pull again to start.

CAUTION! Always ensure the chain brake is engaged when starting the chainsaw.

Specifications

Engine Displacement: 46cc.
Bar Length: 20 inches.
Weight: Approximately 12 lbs.
Fuel Type: 50:1 gas/oil mix.
Chain Speed: 13.5 m/s.
Oiling System: Automatic.
Start Type: Recoil start.

Maintenance

Regular maintenance is essential for optimal performance. Follow these guidelines:

Clean the air filter regularly.
Check and adjust chain tension before each use.
Sharpen the chain as needed.
Inspect the bar for wear and replace if necessary.

CAUTION! Always disconnect the spark plug before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Chainsaw won't start	Fuel issue	Check fuel level and mixture; ensure choke is set correctly.
Chain not moving	Chain tension	Adjust chain tension; check for obstructions.
Excessive vibration	Worn chain or bar	Inspect and replace if necessary.
Oil leaking	Damaged oil tank	Inspect for damage; replace oil tank if needed.

Service: For further assistance, contact customer support.